Quantcast
Channel: SCN : Discussion List - SAP ERP Operations - Quality Management (SAP QM)
Viewing all 2825 articles
Browse latest View live
↧

Layout inspection - recurring without batch control

February 13, 2015, 4:32 am
$
0
0

Hello!

 

We have a kind of inspection (layout inspection) that must be performed one time per year (normally) for each product manufactured. Well, I was thinking to use inspection type 09 (recurring) but sounds that everything is based on the batch date (next control date of the batch). Then I believe that it's not exactly what I need because the layout inspection must cover the procces and the characteristics of the product in the prodction line at this moment. I will not to inspect a old batch produced one year ago. I need to inspect the product that is working now, with more details (one time per year) that the regular quality control.

 

It's like to create a manual inspection lot based on a specific inspection plan. But I would like to know if is there a standard treatment to this issue.

 

Thank you.

↧
Search

Selection using QE72/QA32 with batch classification is not working

January 23, 2015, 7:37 am
$
0
0

Hi SAP experts,

 

I have a problem on the selection using QE72 or QA32 with batch classification (MM).

I fill my plant and click on "Class selection" , then fill Class  (a specific one) and class type (023).

I fill two caract., the first one is managed in character so when I populate my value, I have to select "Find String".

The other one is numeric.

 

The program find 2 references, which is OK for me.

I select all of them  (by select all the table and click on the 1rst button on the left) and back to the selection screen (the button is now in green).

I execute my selection and SAP shows me  inspection lot which are not corresponding to the previous criteria.

The inspection lot  selected by SAP are only corresponding to the criteria of the selection screen without taking into account the selection made with the classification.

 

Thank’s in advance.

↧
↧

QM Implementation

January 15, 2015, 10:29 pm
$
0
0

Hello QM Superiors,

 

I have some queries regarding QM procedures,

 

For inspecting material with material specification, we need to perform these transaction:

MM01, QS21, QS61, QA01, QA32.. is the sequence is right..?

 

If the sequence is right, then what is the use of QS41 and QS51 in material specification.

 

Please clear my doubt and elaborate the same. Thanks in advance

 

Regards,

Santosh

↧

BAPI for Quality Info Record Not working

February 14, 2015, 7:28 am
$
0
0

Hi Experts,

 

Does anyone have an idea why the BAPI for quality info records fail to update the records?

I am using QB_VB_QINF_POST to update three fields Inspection Control screen of Quality Info Record but the BAPI just gets executed and don t give any error message. The records are not updated. I have tried it with BAPI_TRANSACTION_COMMIT but still doesn t work out.

 

I am passing vendor, material and plant in Import QINF_OLD_IMP and vendor plant and material + three fields to be updated in QINF_IMP.

 

Any alternatives/suggestions will be highly appreciated.

 

Thanks and Regards,
Arun

 


↧

Auto Update of user status in Quality Info Record

February 14, 2015, 6:16 pm
$
0
0

Hi,

I am trying to approve vendors based on status profile in Quality Info Record. My requirement is to update the status automatically based on usage decision. I know I can do it manually but I was wondering through standard functions if this update can be done based on some conditions.

 

 

Capture.JPG

 

Thanks a lot

Snigdho

↧
↧

Inspection Origin 08

February 15, 2015, 4:08 am
$
0
0

Dears Expert's,

                Greeting,

i face a issue in Quality System  and i have two weeks to going life.

 

i had great a new inspection type Z04 with Usage 05 for Movement type 315 and Active and Reactive in Material Master.

and in the same i use the standard 08 with usage Z6  for Movement Type 322 and active it in Material Master (using it for internal Return in Plant) in attached File.

In Same Material Finished Product.

Now the System did not know how it working well.

Are there any idea to solve this Issue.

 

 

 

best regards,

thanks

↧

UserExit after Good Receipt and Inspection Lot Creation

January 15, 2015, 4:48 am
$
0
0

Hello QM-Gurus,

 

I needyour helpagain.


I make agoods receipt (MB1C).In the background,the inspection lotis created and stored.

Now I have tocalla program automatically.

Whichuser exitcan Ido that?


Thanks,


Ulrike

↧

QM Notification, Transfer UR to QI with function in action box

February 16, 2015, 1:14 am
$
0
0

Hi expert,

 

I try to create notification with transfer Unrestricted to Inspection Stock(action box) then i save notification system throw this message below

 

No inspection lot could be created

Message no. QM162

Diagnosis

The inspection lot could not be created, because no inspection lot is maintained for this material for inspection type 08 (inspection at transfer posting).

Procedure

  • Check in the material master (in the quality management view), whether inspection type 08 is maintained.
  • Check whether an inspection plan is assigned to the material.

 

but i already to created inspection plan(03 Universal) and inspection type 08 is already maintained.

 

How i solve to this case.

 

PS. my action box maintained

- Usage : Extended view (Create, Change )

   and : Notification

Documentation : As task

 

Function module : QMLR_CREATE_INSP_LOT

Icon : ICON_MOVE

Quick info : Transfer Post. Unrestr. -> Insp.


Code group : QM-G2

Code : 0020

 

FM when saving : QMLR_CREATE_INSP_LOT_STEP2

Completed : selected

 

Rules

(selected) : Only performed once

↧
Search

QAC2 Modify the quantity, partial movement.

October 14, 2011, 2:19 pm
$
0
0

Hi,

I have a problem because we would like to make the movement 323 by the QAC2 for a partial quantity of the Lot of inspection. If the lot of inspection is 10 units we want to move just 5, but I can´t do it by QAC2. It would be possible by MIGO with this movement but it is not allow due to the error message: QA495. Are there other ways to do it by other transaction? We need to move quantity of the lot inspection to other storage location in quality. In the transaction QA11 it is possible but just to unrestricted, block, etc. At the end we would like to have 5 units in storage location A and other 5 units in the storage location B for the same Lot of inspection.

Thank you and best regards.

 

↧
↧

QM-SPC

February 16, 2015, 1:39 am
$
0
0

Hi QM users,

 

My client is asking for a chart/graphs in SAP. As i am new to QM so i did not know anything regarding SPC

Can you all guide me step by step procedure for SPC

Like: what master data is required and configuration settings at spro.

If any documents will help me a lot

 

Regards,

Santosh

↧

Business Blue Print required

February 16, 2015, 12:06 am
$
0
0

Hi Guru's

 

I am very new to sap. Recently I have been recruited as SAP PP/QM consultant. I am looking for some BBP for both PP and QM. I am looking for all type of BBP's in all industrial sectors. If you have any Documents please send for my reference.

 

 

Thanks & Regards

 

Varaprasad

↧

Multiple results recording

April 2, 2012, 10:11 pm
$
0
0

Dear gurus

Greetings,

what is the config setting to enter multiple results in result  recording screen.At present i am able to record a single result.

i am unable to expand single vals field to expand in result recording table.

Can somebody pls help me.

 

Thanks & regards

Venkat.

↧

Ud Code Not To be changed.

February 16, 2015, 4:54 am
$
0
0


Dear all,

 

Ud code once given it should not to be changed in an inspection lot

 

 

Without removing QA12 T code we need to do this.

 

 

Kindly suggest your suggestions.

 

 

Regards,

 

U.linganathan

↧
↧

Action box Quality notification

February 17, 2015, 2:10 am
$
0
0

I have the need to create a number of action boxes to implement in Quality notification....

 

They are more like links to standard transactions:

 

Maintain BOM

Maintain Material master

Maintain Routing

Create ECO

Change ECO

Check inventory levels...

 

Is there an easy way to crete these Action boxes? A bit of a djungle to find these in SPRO under QCC1


↧

Inspection lot status DEF but any defect assigned

February 17, 2015, 2:47 am
$
0
0

Hi experts,

 

I'm currently facing an issue linked to defects and results change history.

 

When user is keying a NC results, a defect is automatically created. At this time, IL status moves to INSP DEF.

 

Few minutes later, user changes result to a conform one. Defect is then automatically removed, despite IL status remains INSP DEF.

 

My question is : Is there a way to identify which result has been changed by the user ? At the inspection lot level ?

 

Many thanks !

↧
Search

Generic Object Service for inspection plan

February 16, 2015, 10:48 am
$
0
0


Hello experts,

i'm looking for the "Generic Object Service" for inspection plan (QP02/03) but i can't find that common function. I find BUS1171 which is availible for that function but no connection to QP02/03... ??!?!?

Whats wrong? Thanks

↧

Substitute for function module QEEM_CHAR_RESULTS_DIALOG

February 17, 2015, 8:15 am
$
0
0

Hi,

 

In the company I work for, we use a custom Z-transaction for confirmations of the production process. In it we use the function module "QEEM_CHAR_RESULTS_DIALOG" for confirmations. With it we are able to get to a position of a characteristic value. Unfortunately we want to go to an overview of the characteristic values. (See attached picture.) Searching the web for an alternative function module which does that, did not lead to any success. Does anybody know of a function module I missed? Alternatively is there another solution which does not involve too much coding?

 

Best regards,

Michael

↧
↧

QM-R&D process

February 17, 2015, 6:44 am
$
0
0

Hi QM users,

 

I have a big doubt in a R&D process, A company is having an R&D department, in which they carry out  new product development, new product variation. In R&D process they develop new formulation/BOM with QA lab trials and run the product trials. if product trial fails they make changes in formulation.

how to map this process in SAP-QM..?

↧

Overriding the status quality inspection with unrestricted use

February 12, 2015, 4:37 am
$
0
0

Hi,

 

I have an issue getting a goods receipt posting (101) to unrestricted use.

 

In the material master the status it is set to quality inspection. On the other hand in the transaction migo it is set to unrestricted use by me.

 

Unfortuantely after processing, when I check the stock type, it is set to quality inspection. Therefore I assume that the setting in the material master overrules the settings I personally carried out by hand in the transaction migo. Is this the case?

 

If so, is there a way (e. g. setting) to override this? If this is not the case is there another solution to this problem?

 

Thanks in advance.

 

Best regards

Michael

↧

Layout inspection - recurring without batch control

February 13, 2015, 4:32 am
$
0
0

Hello!

 

We have a kind of inspection (layout inspection) that must be performed one time per year (normally) for each product manufactured. Well, I was thinking to use inspection type 09 (recurring) but sounds that everything is based on the batch date (next control date of the batch). Then I believe that it's not exactly what I need because the layout inspection must cover the procces and the characteristics of the product in the prodction line at this moment. I will not to inspect a old batch produced one year ago. I need to inspect the product that is working now, with more details (one time per year) that the regular quality control.

 

It's like to create a manual inspection lot based on a specific inspection plan. But I would like to know if is there a standard treatment to this issue.

 

Thank you.

↧
Viewing all 2825 articles
Browse latest View live
Search
<script src="https://jsc.adskeeper.com/r/s/rssing.com.1596347.js" async> </script>